→ Application

→ Chinese

 
 
   
  Home->Products->EMV-M
  EMV Multiple Outputs
 
 Product Information
  Description
 

The EMV150C12T28 brick DC/DC converters is a high density, high density, wide 

  

input  voltage range,  high reliability  multiple output DC/DC converter. The high 

 efficiency DC/DC converters offer a fully enclosed size  only is 1.59 X 1.39 X 0.30 inch 

(40.5 X 35.5 X 8mm) and current levels that exceed all other same size of  power converters

on the market. With a wide input voltage range of 9-36 VDC, It offer four outputs

 with 28V, 12V, 5V, 3.3V, 1.2V. The 28V and 12V is for custom output available The model

features input under-voltage lockout, output over-voltage protection, over-temperature

protection, output overload protection and multi-function.The fully enclosed, encapsulated

construction with aluminum heat spreader design achieves efficient heat transfer

with no hot spots. The use of patent-pending hybrid planar transformer technology and other

 

patent-pending design concepts facilitate maximum power delivery with the highest efficiency   

 

of  up to 85%. The converters combine creative design concepts with highly derated power  

 

devices to achieve very high reliability, high performance and low cost solution to systems 

 

designers requiring maximum power in small footprints.

 
 
Applications Features

  GPS, Comput  notobook, Workstation.

  Distributed Power Architecture

  Data Communications,  Telecommunications

  Wireless Communications

  Servers, Switches and Data Storage

  Semiconductor Test Equipment

  Aerospace, Aerocraft

  Complex power system

  Portable weaponry

  Wide input  voltage range:  9-36V

  28V, 12V , 5V, 3.3V, 1.2V output models

  28V and 12V - Custom output available

   Ripple & Noise ( 20Mhz BW) <100 mv (pk-pk) typical

  Remote On/Off control

   Output Regulation: +/- 0.2% no load to full load

   Output over-current and over-voltage protection

   Over Temperature protection

   Input Under voltage protection

   Efficiency:  85%

  No minimum load required

  Low profile of only 0.30 inch (8mm).

  -40°C to +85°C ambient operation

  MTBF of 1,000,000 hours @ 50°C (Bellcore)

  If you can't open these file( Adobe Acrobat PDF), Please download:
 
Product introduction Products Technique introductions
EMV-M Spec. EMV-M Datasheet